|
|
Products
> BinMaster >Capacitance
Probes
|
|
PROCAP
I & II
PROCAP I & II capacitance probes offer interference-free,
fail-safe operation & "Quick-Set" calibration.
BinMaster’s capacitance sensors are used for high and
low level detection in bins, silos, tanks, hoppers, chutes and
other vessels used for material storage or process manufacturing.
BinMaster PROCAP I & II capacitance probes provide interference-free
operation – working far below the RF level of 9 KHz at
just 6 KHz. – and will not interfere with two-way radios
or other equipment operating in the radio spectrum. Class II
hazardous location ratings and a wide assortment of probes and
extensions make these capacitance probes appropriate for a variety
of solid, liquid and slurry materials. Learn
More. |
|
PROCAP
IX & IIX
PROCAP IX & IIX capacitance sensors are designed for use
in hazardous locations, featuring CSA Class I, Groups C &
D and Class II, Groups E,F & G ratings. They are suitable
for challenging environments where there is a risk of explosion,
detecting high and low levels in bins, silos, tanks, hoppers,
chutes and other vessels used for volatile material storage
or process manufacturing. These intrinsically safe capacitance
probes provide interference-free operation – working far
below the RF level of 9 KHz at just 6 KHz. – and will
not interfere with two-way radios or other equipment operating
in the radio spectrum. Learn
More |
|
PROCAP
I 3-A & II 3-A
The PROCAP I 3-A & II 3-A meet rigorous USDA, FDA and 3-A
material and design standards for sanitary food and dairy processing.
They can be used for high and low level detection in bins, silos,
tanks, hoppers, chutes and other vessels used for the storage
or manufacture of food or dairy products. They operate by detecting
the presence or absence of material in contact with the probe
by sensing minute changes (as low as 0.5 pF) in capacitance
caused by the difference in the dielectric constant of the material
versus the air. They feature a Class II hazardous location rating
and are available with a wide assortment of probes and extensions
to meet a variety of processing needs. Learn
More |
|
|
PROCAP
I-FL & II-FL
The PROCAP I-FL & II-FL offer “no probe intrusion”
and are designed for space constrained areas or applications
where material flow or bridging may damage a standard probe.
It can be mounted on a bin wall, conveyor housing or a chute.
The face of the bottom of the FL serves as the capacitance sensor
which features Pro-Shield compensation for material build up
and an adjustable time delay of up to 30 seconds to ensure accurate
readings. The screw-cap enclosure offers easy access to components,
which is especially handy in space-constrained installations.
Learn More |
|
|
PRO
AUTO-CAL
Pro Auto-Cal offers simple and automatic calibration and external
testing without having to remove the cover of the unit. Calibration
takes just seconds and is performed with the use of a special
magnet. This unit also allows for the simulation of either a
covered or uncovered condition without accessing the probe assembly
or the electronics. A visual LED on the top of the housing indicates
sensor status, while temperature-stable calibration and an adjustable
time delay of up to 10 seconds allows for settling of material
to ensure the most accurate readings. Learn
More |
|
|
PRO
REMOTE
The Pro Remote capacitance sensor features remote electronics
located in a housing that is separated from the probe making
it suitable for high temperature, high vibration, or hazardous
environments. It is CSA Class II listed and allows for the electronics
to be installed up to 75 feet from the sensing probe and the
hostile conditions, depending on the required sensitivity. It
offers simple, "Quick-Set" calibration and adjustable
sensitivity to less than one picofarad, making it highly reliable
in a variety of powders, solids, liquids and slurries. Learn
More |
|
|
COMPACT
PRO
Compact Pro is a compact capacitance probe for reliable level
measurement and plugged chute detection for liquid, powder,
granular, and pelleted materials. This probe is designed for
tight spaces where proximity switches will not work and is appropriate
for use in tanks, bins, silos, chutes, conveyors, pipes and
load out hoppers. It features four levels of static discharge
protection, which is important for pneumatically conveyed materials.
Learn More |
|
|
Point
Level Alarm Panel
The BinMaster Point Level Alarm Panel is designed to alert the
user to vessel level conditions via a blinking LED light and
an audible alarm, saving time and eliminating the need to manually
inspect vessel levels. Level indicators – such as a diaphragm
switch, rotary paddle, tilt switch, capacitance probe or vibrating
rod – are placed strategically at desired points in each
vessel, enabling the user to be automatically notified when
a bin reaches a full, partially full, or empty level. Learn
More
|
|
|
 |
